input rectifier diode 1 bulletin i2122 rev. a 07/97 v f < 1v @ 30a i fsm = 950a v rrm 800 to 1600v safe ir series 60eps.. i f(av) sinusoidal waveform v rrm 800 to 1600 v i fsm 950 a v f @ 30a, t j = 25c 1.0 v t j - 40 to 150 c characteristics 60eps.. units 60 a major ratings and characteristics to-247ac (modified) description/features the 60eps.. rectifier safe ir series has been optimized for very low forward voltage drop, with moderate leakage. the glass passivation technology used has reliable opera- tion up to 150 c junction temperature. typical applications are in input rectification and these products are designed to be used with international rectifier switches and output rectifiers which are available in identical package outlines. package outline
2 60eps.. safe ir series bulletin i2122 rev. a 07/97 t j max. junction temperature range - 40 to 150 c t stg max. storage temperature range - 40 to 150 c r thjc max. thermal resistance junction 0.35 c/w dc operation to case r thja max. thermal resistance junction 40 c/w to ambient r thcs typical thermal resistance, case to 0.2 c/w mounting surface , smooth and greased heatsink wt approximate weight 6 (0.21) g (oz.) t mounting torque min. 6 (5) max. 12 (10) case style to-247ac jedec (modified) thermal-mechanical specifications parameters 60eps.. units conditions kg-cm (ibf-in) voltage ratings part number v rrm , maximum v rsm , maximum non repetitive i rrm peak reverse voltage peak reverse voltage 150c vvma 60eps08 800 900 1 60eps12 1200 1300 60EPS16 1600 1700 v fm max. forward voltage drop 1.07 v @ 60a, t j = 25c r t forward slope resistance 3.96 m w v f(to) threshold voltage 0.74 v i rm max. reverse leakage current 0.1 t j = 25 c 1.0 t j = 150 c electrical specifications parameters 60eps.. units conditions t j = 150c v r = rated v rrm ma i f(av) max. average forward current 60 a @ t c = 118 c, 180 conduction half sine wave i fsm max. peak one cycle non-repetitive 950 10ms sine pulse, rated v rrm applied surge current 1100 10ms sine pulse, no voltage reapplied i 2 t max. i 2 t for fusing 4512 10ms sine pulse, rated v rrm applied 6300 10ms sine pulse, no voltage reapplied i 2 ? t max. i 2 ? t for fusing 63000 a 2 ? s t = 0.1 to 10ms, no voltage reapplied absolute maximum ratings parameters 60eps.. units conditions a a 2 s
3 60eps.. safe ir series bulletin i2122 rev. a 07/97 fig. 1 - current rating characteristics fig. 2 - current rating characteristics fig. 4 - forward power loss characteristics fig. 3 - forward power loss characteristics 100 110 120 130 140 150 0 10203040506070 30 60 90 120 180 maximum allowable case temperature ( c) conduction angle average forward current (a) 60eps.. series r (dc) = 0.35 k/w thjc 110 120 130 140 150 0 20406080100 dc 30 60 90 120 180 maximum allowable case temperature ( c) conducti on peri od average forward current (a) 60eps.. series r (dc) = 0.35 k/w thjc 0 10 20 30 40 50 60 70 80 90 100 110 0 20406080100 dc 180 120 90 60 30 rms limit conducti on peri od average forward current (a) maximum average forward power loss (w) 60eps.. series t = 150c j 0 10 20 30 40 50 60 70 80 90 0 10203040506070 rms limit 180 120 90 60 30 conduction angle average forward current (a) maximum average forward power loss (w) 60eps.. series t = 150c j fig. 5 - maximum non-repetitive surge current fig. 6 - maximum non-repetitive surge current 300 400 500 600 700 800 900 1000 1 10 100 number of equal amplitude half cycle current pulses (n) peak half si ne wave forward current (a) initial t = 150 c @ 60 hz 0.0083 s @ 50 hz 0.0100 s j 60eps.. seri es at any rated load condition and with rated v applied following surge. rrm 200 400 600 800 1000 1200 0.01 0.1 1 pulse train duration (s) peak half sine wave forward current (a) versus pulse train duration. initial t = 150 c no voltage reapplied rated v reapplied rrm j maximum non repetitive surge current 60eps.. series
4 60eps.. safe ir series bulletin i2122 rev. a 07/97 fig. 8 - thermal impedance z thjc characteristics 0.01 0.1 1 0.0001 0.001 0.01 0.1 1 10 square wave pulse duration (s) steady state value (dc operation) 60eps.. series single pulse d = 0.50 d = 0.33 d = 0.25 d = 0.17 d = 0.08 transient thermal impedance z (k/w) thjc fig. 7 - forward voltage drop characteristics 1 10 100 1000 00.511.522.533.544.5 t = 25 c j instantan eous forward cu rre nt (a) instantaneous forward voltage (v) 60eps.. series t = 150c j
5 60eps.. safe ir series bulletin i2122 rev. a 07/97 ordering information table 60 e p s 16 device code 1 5 24 3 1 - current rating 2 - circuit configuration: e = single diode 3 - package: p = to-247ac (modified) 4 - type of silicon: s = standard recovery rectifier 5 - voltage code: code x 100 = v rrm 6 08 = 800v 12 = 1200v 16 = 1600v outline t able 1 cathode anode 3 2 base cathode 15. 90 (0. 626 ) 15. 30 (0. 602 ) 14.20 (0.559) 14. 80 ( 0.583) 3.70 (0 .14 5) 4.30 (0 .17 0) 5.30 (0.208) 5.70 (0 .22 5) 5.50 (0.217) 4.50 (0 .17 7) (2 plcs.) 3.55 (0.139) 3.65 (0.144) 2.20 (0.087) max. 1. 00 (0. 039) 1. 40 (0. 056) 0. 40 (0. 21 3) 0. 80 ( 0. 032) 4.70 (0.185) 5. 30 (0 .20 9) 1.5 ( 0. 059) 2.5 ( 0. 098) 2.40 (0.095) max. 10.86 (0.427) 10.94 (0.430) 20.30 (0.800) 19.70 (0.775) 1 3 dia. dimensions in millimeters and inches
|
